وصف مساقات برنامج بكالوريوس هندسة الميكاترونكس

  • 13020010: النظام الاقتصادي في الإسلام [2 ساعات]


  • 13020020: مكافحة الفساد [2 ساعات]


  • 13020035: مهارات التواصل المهني [2 ساعات]


  • 15010101: تفاضل وتكامل (1) [3 ساعات]

    النهايات والاتصال قواعد الاشتقاق الممسات و المتعامدات، المعادلات المرتبطة بالزمن، نظرية القيم المتوسطة وتطبيقات عليها، الصيغ غير معينة (?/?،0/0) وقاعدة لوبيتال، المحاذيات الافقية والعمودية، القيم القصوى المحلية، التقعر، رسم المنحنيات . الاقترانات المتسامية :الاقترانات الاسية واللوغارتيمية,الاقترانات , معكوسها .


  • 15020105: مختبر فيزياء عامه 1 [1 ساعات]

    تجارب على توازن القوى، الحركة، السقوط الحر وحركة المقذوفات، القوة والحركة، قوانين نيوتن، الاحتكاك، الحركة الدورانية، الشغل، مبدأ حفظ الطاقة، مبدأ حفظ الزخم الخطي، عزم القصور الذاتي للاجسام.


  • 12210467: المجسات ومحولات الطاقة [3 ساعات]

    Transducers and Sensors principles: Resistive, Capacitive, and Inductive Sensors, Transducers for temperature such as: Thermocouple Sensors. Resistance-Temperature Detectors, Thermometers, Solid-State Temperature Sensors, Transducers for light, Proximity Transducers, Strain gauge transducer, LVDT, Displacement and Motion Transducers, Other types of sensors, Transducers interfacing and conditioning circuits.


  • 12110204: مختبر دوائر كهربائية(2) [1 ساعات]

    Resistors and resistive circuits; potentiometers; KVL, KCL, superposition principle; Thevenin’s theorem and maximum power transfer; RLC current and voltage characteristics; frequency response of RL, RC and RLC circuits; series and parallel resonant circuits; transient response.


  • 12210575: انظمة التحكم الهيدروليكية والهوائية [3 ساعات]

    In this course , students will learn fluid power systems design and operation, the distribution system, Source of hydraulic and pneumatic power: pumps and compressors, Hydraulic and pneumatic valves, Actuators: linear and rotary actuators (hydraulic and pneumatic actuators), Limited rotation actuators, electro –pneumatic and electro-hydraulic systems , Design and analysis of hydraulic and pneumatic circuits.


  • 12210577: الريبوتات [3 ساعات]

    This course introduces the students to the field of robotics. The introduction includes general terminology related to robotics, robots’ classifications, and the main components of manipulators. Furthermore, the following topics are covered: spatial description and transformation, forward kinematics, inverse kinematics, Jacobians, manipulator dynamics, and trajectory planning. Finally, an introduction to mobile robots is provided.


  • 12310599: إدارة المشاريع الهندسية [3 ساعات]


  • 12210592: محرك الاحتراق الداخلي (1) [3 ساعات]

    In this course, students are expected to learn fundamentals of internal combustion engine : types and their operation, engine parameters, thermo chemistry of fuel-air mixtures, ideal models of engine cycles, combustion in spark ignition engines, combustion in compression ignition engines and pollutant formation.


  • 13020007: اللعة الإنجليزية 3 [2 ساعات]


  • 13020022: المكتبة وطرق البحث [2 ساعات]


  • 13020029: مسيرتي 2 [2 ساعات]


  • 13020030: الفرد والمجتمع [2 ساعات]


  • 13020031: قضايا عالمية معاصرة [2 ساعات]


  • 12120306: مختبر متحكمات دقيقه [1 ساعات]

    Study of microcontroller architecture, I/O input /output, timers, interrupt structures, analog-to-digital converters, capture compare and PWM modules. Testing and evaluation of microcontrollers based systems. Design and development of complete microcontrollers based digital systems (project).


  • 12120206: مختبر الكترونيات [1 ساعات]

    This course is an introductory experimental laboratory that explores basic topics in electronics: Rectifier diodes, characteristics representation of diodes of different semiconductor materials, half-wave rectifier and bridge rectifier. Special purpose didoes, LED, Zener characteristics, Series and series-opposed circuit of Zener diodes, DC and AC voltage limitations and overload protection with Zener diodes. Bipolar transistors, testing and rectifying behavior, control characteristics, feedback characteristics and amplifier circuits. JFET and MOSFET.


  • 12210446: اهتزازات ميكانيكية [3 ساعات]

    This course is taught theoretically and experimentally in the lab. The following topics are covered: properties of oscillatory motion, derivation of governing differential equations, free and forced vibrations of damped and undamped sinlge degree-of-freedom systems, rotating and reciprocating unbalance, transient vibrations, free and forced vibrations of two-degrees-of-freedom systems.


  • 12130527: معالجة الاشارات الرقمية [3 ساعات]

    Discrete convolution, Fourier transform analysis of discrete time signals and systems, DTFT, DFT and FFT. Z-transform analysis of discrete time signals and systems, implementation of discrete time systems, FIR systems, IIR systems, design of IIR filters from analog filters


  • 13020014: العلوم السياسية [2 ساعات]


  • 13020016: القانون في حياتنا [2 ساعات]


  • 13020019: الديموقراطية والانتخابات [2 ساعات]


  • 13020021: تاريخ العلوم عند العرب [2 ساعات]


  • 12210137: مشغل هندسي [1 ساعات]

    .This course aims to provide students with Workshop principles basics, safety measures and precautions. Also it aims to provide students with basic manual skills in dealing with measuring equipments, manual sheet cutting operations, manual metal sawing and filing, Riveting process, manual threading, electrical metal welding, and Lathe cutting processes.


  • 15010325: تحليل عددي [3 ساعات]

    الاخطاء ,نظرية تايلر , حل المعادلات ذات المتغير الواحد بطرق مختلفة, الاستكمال وطرق مختلفة فيه, التفاضل والتكامل العددي , حل المعادلات التفاضلية بطرق عددية .


  • 12130302: الاشارات والنظم [3 ساعات]

    Representation of signals and systems, Basic continuous and discrete time signals, Continuous and discrete time systems, Memory, causality, stability, inevitability, linearity, and time invariance. LTI systems, impulse response, Time domain analysis of CT systems convolution integral, Fourier series analysis of CT signals. Fourier transform analysis of CT signals , Properties of Fourier transform , Fourier transform of periodic signals , Frequency response , Energy and power spectral densities, Hilbert transform.


  • 12120305: متحكمات دقيقه [3 ساعات]

    Microprocessors and Microcontroller Systems: microprocessors, microcontrollers, memory, input/output, busses (data, address, control). Microprocessor and Microcontroller Architecture: internal structure, ALU, registers, flags, interrupts and I/O ports. Programming: instruction set, assembly language, programming techniques. Subroutines, addressing modes. Examples of microprocessors and microcontrollers in engineering applications.


  • 12210473: مختبر انظمة التحكم [1 ساعات]

    The following topics are covered: Introduction to MATLAB/Simulink, time Response of 1st and 2nd order systems. Characteristics of PID controller, tuning of PID controller using Ziegler and Nichols methods and DC motor control.


  • 12120430: انظمة التحكم المبرمجة PLC [3 ساعات]

    Traditional Control Systems; Logic controllers; Programmable logic controllers definition and applications; Digital Input/ Output; Installation of PLC systems; Environment considerations; Combinational systems implementation; Function Blocks, Instruction list , Ladder , and Sequential Functional Charts (SFC) programming; Translation between programming languages.


  • 12110335: مختبر الات كهربائية [1 ساعات]

    This course consists of hands-on and computer-aided laboratory exercises that explore topic areas from 12110317 Electrical Machines. Transformers, DC motors, synchronous generators, synchronous motors, 1-ph motors and 3-ph induction motors are all studied experimentally in this module. .


  • 12210243: استاتيكا [3 ساعات]

    This course is to cover force and position vectors; equilibrium of particles and rigid bodies; equivalent system of forces and couples; free body diagrams; static analysis of trusses, frames, and machines; distributed forces; centroids and centers of gravity; internal forces; friction; and moments of inertia.


  • 12140101: برمجة حاسوب [4 ساعات]

    Computer Programming is an introduction to the automated processing of information, including computer programming. This course gives students the conceptual background necessary to understand and construct programs, including the ability to specify computations, understand evaluation models, and utilize major constructs such as functions and procedures, data storage, conditionals, recursion and looping. At the end of this course, students should be able to read and write small programs in the language of C++ in response to a given problem or scenario, preparing them to continue on to Object Oriented Programming. The knowledge and skills acquired and practiced will enable students to successfully perform and interact in a technology-driven society. Students enhance reading, writing, computing, communication, and reasoning skills and apply them to the information technology environment.


  • 12210349: رسم هندسي بالحاسوب [1 ساعات]

    Experiments applied to: Kinematic Analysis of mechanisms, Velocity and acceleration polygons. Static and inertia forces analysis, dynamic analysis of cams, gears, and gear trains, Balancing of machines. .


  • 12210557: مشروع تخرج [3 ساعات]

    Practical implementation of theoretical and experimental knowledge gained from the course of his study and work carried out in project one


  • 12120208: مختبر تصميم الدوائر المنطقية [1 ساعات]

    Practice on the following topics: : basic Logic gates, bistable multivibrators with focus on lateches and flip-flops. Code converter circuits, arithmetic circuits, counting circuits including synchronous and asynchronous counters, register circuits, multiplexers,demultiplexers, and Arithmatic Logic Unit(ALU).


  • 12120420: مختبر قيادة كهربائية [1 ساعات]

    This course consists of hands-on and computer-aided laboratory exercises that explore topic areas from 12120419 Electrical Drives. The following topics are studied experimentally in this course: DC and AC drives, speed –torque characteristics, quadrant of operation, open loop and closed loop speed control, current limitation and position control.


  • 12210511: الذكاء الاصطناعي [3 ساعات]

    This course introduces the student to the basics of AI: searching algorithms, neural networks including generative networks and convolution neural networks, learning methods including supervised and unsupervised learning, other Computational Intelligence methods: fuzzy systems and evolutionary algorithms.


  • 12210578: مختبر الريبوتات والأتمتة [1 ساعات]

    Experiments covered in this lab includes robot basic operation, motion planning, obstacle avoidance, sorting, object location and forward and inverse kinematic experiments. In this lab, experiments related to mechatronics systems are covered such as,programming production lines, elevator and hoist systems, conveyer belt, 3d printer and other mechatronics systems.


  • 12210583: التحكم الرقمي [3 ساعات]

    the transfer function of the ZOH, effect of the sampler on the transfer function of a cascade, DAC, analog subsystem, and ADC combination transfer function, and steady-state error and error constants. Stability of digital control systems: definitions of stability, stable z-domain pole locations, stability conditions, Routh-Hurwitz criterion, Jury test, and Nyquist criterion. Digital Control System Design: z-domain root locus, domain digital control system, digital implementation of analog controller design, and frequency response design. Additionally, the state-space representation.


  • 12210481: مختبر قوة المواد [1 ساعات]

    .Experiments covered in this lab include reactions on beams; modulus of elasticity and modulus of rigidity for various materials; stress-strain diagram; torsion in bars; motion of various mechanisms; static and dynamic balancing; tension; flexure; shear stress, hardness; Impact; fatigue; torsion and deflection.


  • 12210589: مواضيع خاصة في الميكاترونكس [3 ساعات]

    Selected topics in mechatronics engineering (Topics are selected by the department).


  • 12220349: مختبر نظرية الالات [1 ساعات]

    Experiments applied to: Kinematic Analysis of mechanisms, Velocity and acceleration polygons. Static and inertia forces analysis, dynamic analysis of cams, gears, and gear trains, Balancing of machines.


  • 15200099: إنجليزي إستدراكي [3 ساعات]

    انجليزي استدراكي 15200099: يركز هذا المساق بشكل أساسي على تنمية مهارات الطلبة في تعلم اللغة من خلال تزويد الطلاب بالمهارات الأساسية اللازمة للتواصل الناجح في كل من الأشكال الشفوية والمكتوبة للغة، بالإضافة إلى القواعد النحوية وكيفية استخدام المفردات في سياق ذي معنى.


  • 15200102: اللغة العربية [3 ساعات]

    يهدف المساق إلى تنمية قدرات الطلاب المعرفية في مهارات الاتصال باللغة العربية المتعلقة بالتحدث والقراءة والكتابة والاستماع من خلال التعريف بمستويات اللغة العربية وإتقان استخدام المعاجم العربية الشائعة ومعرفة الأخطاء الشائعة اللغوية والإملائية والنحوية والاطلاع على نماذج أدبية عربية قديمة وحديثة إضافة للنموذج الأعلى القرآن الكريم.


  • 15200106: اللغة الإنجليزية (1) [3 ساعات]

    مساق اللغة الانجليزية 1 مساق نظري تقدمه جامعة فلسطين التقنية خضوري لجميع طلبة البكالوريوس و لجميع الكليات كمتطلب جامعة، ويهدف هذا المساق،عموما، الى تطوير مهارات الطلبة للغة الانجليزية الرئيسية والفرعية، حيث يزود الطلبة بمجموعة متنوعة من الانماط اللغوية، وانماط مختلفة من القواعد والبناءات والتراكيب اللغوية، والكلمات والتعاريف العامه، والتي عند اكتسابها ، تساعد الطالب على التواصل ذو المعنى ضمن المواقف والسياقات العامة والحياة اليومية. وهذا المساق موجه باتجاه اكساب الطلبة المهارات التي يحتاجون لاستيعاب النصوص ، والسياقات، والمواقف والتي لها علاقة بمواضيع الحياة اليومية. خلال هذا المساق، سوف يعرض للطلبة مجموعة متنوعة من المدخل السمعي لغاية توسعة وتعميق مهارة فهم المسموع، ومهارات التفكير الناقد. يتوقع من طلبة المساق اكتساب المهارات اللازمة والتي تمكنهم من التعبيرعن آرائهم حول الموضوعات والمشاكل اليومية بشكل شفوي وبشكل مكتوب ، مما يساعد في توسعة الافق الاكاديمي للطلبة .


  • 15200112: اللغة الإنجليزية (2) [3 ساعات]

    .مساق اللغة الانجليزية 2 مساق نظري تقدمه جامعة فلسطين التقنية خضوري للطلاب في كليات العلوم والهندسة وكذلك طلاب تكنولوجيا التعليم؛ يقدم المساق لمحة عامة عن مهارات تعلم اللغة الإنجليزية في القراءة والكتابة والتحدث والتي ستمكنهم من التواصل بشكل هادف في السياقات والمواقف العلمية. كما يقدم مجموعة متنوعة من الأنماط النحوية للغة العلمية وعناصر المفردات اللازمة لفهم السياقات والاتجاهات العلمية. خلال هذا المساق، سيتعرض الطلاب لمجموعة متنوعة من الموضوعات العلمية والمدخلات السمعية من أجل توسيع وتعميق مهارات التفكير النقدي لديهم ومساعدتهم على التعبير عن آرائهم حول الموضوعات والمشكلات العلمية الحديثة.


  • 13020004: اللغة الروسية [2 ساعات]


  • 13020006: اللغة الإيطالية [2 ساعات]


  • 13020012: الحضارة الإسلامية [2 ساعات]


  • 13020033: تربية الطفل وتنشئة الأسرة [2 ساعات]


  • 15010102: تفاضل وتكامل (2) [3 ساعات]

    التكامل المحدود، النظرية الاساسية في التفاضل والتكامل غير المحدود، تطبيقات على التكامل غير محدود، المساحة، حجم الدوران،الاقترانات الزائدية ،ا طرق التكامل :التكامل بالاجزاء، التعويض المثلثي، الكسور الجزئية، التعبيرات التربيعية، المنحنيات في المستوى، ، مساحة سطح الجسم الدوراني، والتكاملات المعتلة، المتتاليات والمتسسلسلات:التقارب والتباعد، المتسلسلات ذات الحدود الموجبة، المتسلسلات ذات الحدود المتناوبة، التقارب المطلق والمشروط، متسلسلات القوى ، الاشتقاق والتكامل، متسلسلات تيلور.


  • 15020101: فيزياء عامه 1 [3 ساعات]

    المتجهات، الحركة على خط مستقيم، الحركة في المستوى بما في ذلك حركة المقذوفات والحركة الدورانية المنتظمة، الديناميكا وقوانين نيوتن، الاحتكاك، الشغل والطاقة، مبدأ حفظ الطاقة، الزخم الخطي ومبدأ حفظه، التصادم المرن وغير المرن، كينماتيكا وديناميكا الحركة الدورانية، عزم القصور الذاتي، المرونة، الموائع.


  • 15020102: فيزياء عامه 2 [3 ساعات]

    الشحنة الكهربائية، المجال الكهربائي، قانون غاوس، فرق الجهد الكهربائي، المكثفات والمواد العازلة، التيار الكهربائي والمقاومة، قوانين أوم وكيرشوف، القوة الدافعة الكهربائية، المجال المغناطيسي، قانون أمبير، قانون فرادي، الحث الكهرومغناطيسي.


  • 12210136: رسم هندسي [2 ساعات]

    This course is to teach students the tools and techniques for making engineering drawings. Students will gain the knowledge of hand drafting instruments and their use; orthographic projection; and principal views. Applications will include two-dimensional drawings using CAD software.


  • 12210472: انظمة التحكم 2 [3 ساعات]

    system design using integration networks, and phase-lag design using the root Locus. Frequency response methods and stability in the frequency domain: mapping contours in the s-plane, the Nyquist criterion, relative stability and the Nyquist criterion, the stability of control systems with time delay, and PID controllers in the frequency domain. The design of state variable feedback systems: controllability and observability, full-state feedback control design, observer design, integrated full-state feedback and observer, and reference inputs.


  • 12210350: تطبيقات هندسية باستخدام Mat Lab [3 ساعات]

    .


  • 12210345: قوة المواد [3 ساعات]

    Topics covered in the course include Equilibrium of deformable body, stress, normal stress, allowable stress, deformation and strain, material properties, axial loading, principle of superposition, thermal stress, statically indeterminate axially loaded member, torsional deformation, torsional formula, power transmission, shear-bending diagram, bending deformation of straight member, flexure formula, shear stress in beams, thin walled pressure vessel, combined loading.


  • 12210342: الانتقال الحراري وميكانيكا الموائع [3 ساعات]

    .This course provides students with an introduction to principal concepts and methods of fluid mechanics and heat transfer. Fluid Mechanics includes pressure, hydrostatics, and buoyancy; mass conservation and momentum conservation for moving fluids; flow through pipes; pumps; boundary layer; lift and drag. Heat transfer includes Fourier's law; conduction processes; thermal resistance; fins; heat equation and lumped capacitance; elementary convection; including laminar and turbulent boundary layers; thermal radiation, ; and basic concepts of heat exchangers.


  • 15200104: خدمة المجتمع [1 ساعات]

    يقوم الطلبة بأعمال تطوعية مثل التبرع بالدم أو ترميم البيوت أو مسارات سياحية أو عقد ورشات تثقيفية في الجامعة ، ويلتزم الطالب بالتدريب أو العمل لمدة 40 ساعة زمنية.


  • 13010007: مهارات الاتصال [1 ساعات]


  • 13020003: اللغة الألمانية [2 ساعات]


  • 13020005: اللغة التركية [2 ساعات]


  • 13020008: الثقافة البدنية [2 ساعات]


  • 13020015: العلاقات الدولية [2 ساعات]


  • 13020017: الإطار القانوني للحكومة الإلكترونية [2 ساعات]


  • 13020027: الثقافة الصحية [2 ساعات]


  • 13020036: تطبيقات برمجية [2 ساعات]


  • 15020106: مختبر فيزياء عامه 2 [1 ساعات]

    تجارب على الجلفانوميتر واستخداماته، قانون أوم، الجهد والمجال الكهربائي، المكثفات، قنطرة وتستون ومجزىء الجهد، القوة الدافعة الكهربائية، قانون كيرشوف، دارات المقاومات والمكثفات والملفات.


  • 12210444: مقدمة في منهجية البحث العلمي [3 ساعات]

    This course aims to promote the breadth of scientific endeavour, the integrated nature of scientific disciplines, the importance of scientific process and critical thinking. The course includes discussions about how data, information, knowledge and decision-making relate to research. The course also focuses on the theoretical considerations involved in the first stage of the research process: formulating the research problem and research questions, hypotheses or objectives. Tips on writing research questions and developing hypotheses are provided. Students are expected to examine a series of scientific issues, dealing with medical, environmental, social and other issues. This course is taught using a combination of scientific discussion, self-directed learning, student presentations, class activities and a research assignment.


  • 12110419: الكترونيات القدرة [3 ساعات]

    Power semiconductor devices: Diodes, Thyristors, Controllable switches such as GTO, MOSFETS, protection of devices and circuits, single–phase and three-phase uncontrolled and phase-controlled rectifiers, dc-dc switch mode converter, and dc-ac inverters.


  • 12210244: ديناميكا [3 ساعات]

    Study the geometry of motion for particles and rigid bodies in different coordinate systems without reference to forces which either cause the motion or are generated by the motion. Deriving the relationship between the external forces acting on rigid bodies/ particles and the corresponding motion applying newton's laws, principle of work and energy, and Impule-momentum. .


  • 12210574: تصميم انظمة الميكاترونيكس [3 ساعات]

    .The course provides the student with a general overview of mechatronic systems, their main components, and the approach to the design process. Furthermore, several mechatronics systems are studied comprehensively. This course covers motor sizing and selection for different mechanisms such as geared hoisting systems, belt and pulley, and ball screw mechanisms. Additionally, modeling of mechatronics systems, controller selection, and sensors selection are discussed.


  • 12210556: مقدمة مشروع تخرج [1 ساعات]

    Collection of Background scientific material relating to the project which the undergraduate selects for graduation project.


  • 15010230: رياضيات هندسية (2) [3 ساعات]

    .المعادلات التفاضلية عالية الرتبة، تحويل فورييه ، تحويل لابلاس ،المعادلات التفاضلية الجزئية ،التحليل العقدي ، تحليل معقد تمثيل هندسي ، تمثيل قطبي ، تمثيل أسي، المستوى المركب ، التكامل الخطي.


  • 13020011: مشكلات معاصرة [2 ساعات]


  • 13020023: علم الفلك [2 ساعات]


  • 13020024: الثقافة البيئية [2 ساعات]


  • 13020028: مسيرتي 1 [2 ساعات]


  • 12210355: أنظمة التحكم (1) [3 ساعات]

    Feedback control system characteristics, and the performance of feedback control systems: test input signals, the s-plane root location and the transient response, the steady-state error of feedback control systems, and the simplification of linear systems. Stability of linear feedback systems: the concept of stability, the Routh-Hurwitz, stability criterion, the relative stability of feedback control systems, and the stability of state variable systems. Additionally, the root locus method.


  • 12210341: مختبر ميكانيكا الموائع ونقل الحرارة [1 ساعات]

    Experiments covered in this lab include flow rate measurements by using weirs, manometers, venturi, orifice and rotameter; calibration of pressure gauges; viscosity; laminar and turbulent flows; pumps, friction in pipes, buoyancy; hydrostatic forces; airfoils and heat conduction in linear and radial directions. .


  • 12110317: الات كهربائية [3 ساعات]

    This module examines electromagnetic and electromechanical systems (electrical machine systems). The properties of magnetic circuits are introduced. Electromagnetic and electromechanical analysis techniques are developed. An understanding of the construction and components used in electrical machines is developed. Students are expected to use the analytical techniques developed in the detailed study of static and rotating electrical machines. In addition, an introduction to machinery principles, magnetic field, induced e.m.f, transformers, equivalent circuit, transformer tests, current transformer is given. Moreover, DC machines including the construction, armature windings and armature reaction is discussed. DC generators, DC motors, synchronous machines, 3-phase alternators, 3-phase synchronous motors, three phase Induction motor, torque/slip relation, speed control, induction generators, single-phase induction motor are all covered in this module.


  • 12120419: قيادة كهربائية [3 ساعات]

    The following topics are covered in this course: definition of electrical drives, DC and AC drives, speed –torque characteristics, quadrant of operation, phase-controlled DC drives, chopper controlled DC drives, frequency control of AC drives, open loop and closed loop control of speed, current and position and flux weakening.


  • 12210586: عمليات التصنيع (1) [3 ساعات]

    This course expose the student to the basic manufacturing processes: Nature and properties of engineering materials, production of metals, foundry and casting processes, hot and cold forming, powder metallurgy and special forming processes, material removal technology, special material removal processes, heat treatment of metals, surface cleaning and finishing processes.


  • 15050105: مختبر كيمياء عامة (1) [1 ساعات]

    السلامة العامة، طرق مخبرية ، المادة المحددة للتفاعل ، صيغة المواد المائية، الصيغة الاولية0 طيف الهيدروجين والاشكال الجزيئية ، تسمية المركبات غير العضويــة ، تفاعلات الاستبدال المزدوج ، معايرة محلول قاعدي وتحليل الخل ، الوزن الجزيئي لمادة متطايره ، تحليل المواد القاصرة والحجم الجزيئي لغاز.


  • 12210590: انظمة المركبات [3 ساعات]

    The following is covered in this course: introduction to automotive engineering, powertrain, brake, suspension, exhaust and emissions, steering, air induction, fuel delivery, engine cooling and lubrication, safety and stability.


  • 13010006: مهارات الحاسوب وتطبيقاته [1 ساعات]

    يهدف هذا المساق لتعريف الطلاب بتاريخ وتطور الحواسيب وأجيالها، فهم فكرة عمل الحاسوب و ارتباط مكوناته المادية والبرمجية بذلك. و من المواضيع التي يتم طرحها في هذا المساق: المفاهيم الأساسية الخاصة بتكنولوجيا المعلومات، المكونات المادية والبرمجة للحاسوب،ذاكرة الحاسوب، تمثيل البيانات، أنظمة الأعداد، نظم التشغيل، شبكات الحاسوب و شبكة الانترنت, قواعد البيانات, أخلاقيات الحاسوب، كتابة الخوارزميات ورسم مخطط تدفق البيانات. كما يتم تدريب الطلاب على آخر الإصدارات من برمجيات الحاسوب الأساسية Microsoft office.


  • 13020001: اللغة العبرية [2 ساعات]


  • 13020026: الريادة والإبداع [2 ساعات]


  • 12110101: دوائر كهربائية(1) [3 ساعات]

    The unit of charge. Current voltage and power, types of circuits and circuit elements. Ohms law. KVL and KCL, single –loop and single node – pair circuits resistance and source combination. Nodal and mesh analysis, source transformations, superposition, Thevenins and Norton. The inductor, V-I relationships for the inductor, capacitors, V-I for the capacitor. Source free RL and RC. Step response for RL and RC. Natural and step response of RLC circuits


  • 12210238: الديناميكا الحرارية [3 ساعات]

    This course provides students with thermodynamics concepts and definitions; the thermodynamic system, properties, phase equilibrium of pure substances, equations of state for gases, tables of properties, computer-aided thermodynamic tables, work and heat. First law of thermodynamics; thermodynamic cycles, change of state, internal energy, enthalpy, specific heat; closed and open systems, steady-state and transient processes. Second law of thermodynamics; reversible and irreversible processes, the Carnot cycle and introduction to entropy


  • 12210347: نظرية الالات [3 ساعات]

    Kinematic Analysis of mechanisms, Velocity and acceleration polygons. Static and inertia forces analysis, dynamic analysis of cams, gears, and gear trains, Balancing of machines.


  • 12210348: تصميم عناصر الالات [3 ساعات]

    Introduction to design process. Material properties. Load and stress analysis. Deflection and stiffness of mechanical elements. Failure theories: static and variable loading. Endurance limit and Fatigue analysis. Design of mechanical elements


  • 12120207: تصميم الدوائر المنطقية [3 ساعات]

    .


  • 12120522: مختبر انظمة PLD +FPGA [1 ساعات]

    An introduction to Hardware Description Language (HDL) and its application from design to verification of digital hardware using PLD and FPGA technologies with the aid of Computer-Based Design and simulation tools such as Quartus and ModelSim.


  • 12120308: استخلاص البيانات [3 ساعات]

    Sensors and transducers, operational amplifiers and applications, signal conditioning (amplification, filtering), sampling & sampling theorem, sample and hold circuits, A/D converters , D/A converters , different types of codes, multiplexing and de-multiplexing , DAQ hardware.


  • 12210587: مختبر عمليات التصنيع [1 ساعات]

    Foundry processes and special casting processes. Welding. Plastic. Hot and cold forming. Powder metallurgy and special forming processes. Material removal technology. Special material removal processes. Heat treatment of metals. Surface cleaning and finishing processes.


  • 15200101: القضية الفلسطينية [3 ساعات]

    يتناول المساق أحداث القضية الفلسطينية عبر أهم العصور، منذ الكنعانيين حتى العام 2021. ويركز على الفتح الإسلامي لفلسطين عام 15 هجري 636م، والاحتلال الصليبي عام 1099، وتحرير صلاح الدين الأيوبي لفلسطين عام 1187. كما ويتحدث عن العثمانيين في فلسطين منذ عام 1516 إلى 1917. ويهتم المساق بالقضية الفلسطينية في فترة الاحتلال البريطاني منذ عام 1917 وصولا إلى نكبة عام 1948، وقيام دولة الإحتلال. ويتناول المقاومة الفلسطينية وأهم الثورات خلال 100عام، والحروب العربية الاسرائيلية منذ عام 1948 إلى عام 2021 . كما ويتحدث المساق عن منظمة التحرير الفلسطينية، والحركات والفصائل الفلسطينية، والسلطة الفلسطينية، وأهم مشاريع التسوية السياسية، منذ إتفاقية كامب ديفيد عام 1978 حتى عام 2021. ويتناول المساق محاولات التهويد للقدس المحتلة، والمسجد الأقصى منذ النكسة الفلسطينية عام 1967 حتى عام 2021، وقضية اللاجئين الفلسطينيين منذ العام 1948. ويستشرف المساق مستقبل القضية الفلسطينية.


  • 15200107: الدراسات الإسلامية [3 ساعات]

    يهدف هذا المساق الى ترسيخ مفهوم الثقافة الإسلامية، وتعريف الطالب بمفاهيم ثقافية وفكريّة سليمة حول مصادر الإسلام، والعقيدة الإسلامية وأركانها، والشريعة الإسلامية التي تنظّم جميع جوانب الحياة الاجتماعية والاقتصادية والسياسية، كما أنّه يوضّح موقف الإسلام من عدد من القضايا الفكريّة المعاصرة، فضلاً عن التعريف بأهمّ التحديّات التي تواجه الإسلام وثقافته.


  • 13020002: اللغة الفرنسية [2 ساعات]


  • 13020009: الإسلام والقضايا المعاصرة [2 ساعات]


  • 13020013: تاريخ القدس [2 ساعات]


  • 13020018: الحركة الأسيرة الفلسطينية [2 ساعات]


  • 13020025: الزراعة في فلسطين [2 ساعات]


  • 13020032: الاقتصاد في العالم الثالث [2 ساعات]


  • 13020034: مقدمة في هندسة السيارات [2 ساعات]


  • 12110102: مختبر دوائر كهربائية(1) [1 ساعات]

    Resistors and resistive circuits; potentiometers; KVL, KCL, superposition principle; Thevenin’s theorem and maximum power transfer; RLC current and voltage characteristics; frequency response of RL, RC and RLC circuits; series and parallel resonant circuits; transient response.


  • 12110203: دوائر كهربائية (2) [3 ساعات]

    Units. The unit of charge. Current voltage and power, types of circuits and circuit elements. Ohms law. KVL and KCL, single –loop and single node – pair circuits resistance and source combination. Nodal and mesh analysis, source transformations, superposition, Thevenins and Norton. The inductor, V-I relationships for the inductor, capacitors, V-I for the capacitor. Source free RL and RC. Step response for RL and RC. Natural and step response of RLC circuits


  • 12210468: مختبر المجسات ومحولات الطاقة [1 ساعات]

    This lab course aims to provide students with the skills of the Measurement and calculation of errors, implementing DC and AC bridges, designing of Analog multi-meter, measurement of frequency and phase, operational amplifier applications circuits, designing function generator, Photovoltaic Cell, Phototransistor, Photoconductive cells, LVDT, Strain gauge transducer, Speed and Displacement sensors, Humidity Sensors, Dynamic Microphone and ultrasonic R/T.


  • 15010229: رياضيات هندسية (1) [3 ساعات]

    المعادلات الخطية وحلها ، المصفوفات ، المحددات ، الفراغات المتجهة والفراغات الفرعية ، التحويل الخطي ، قيم eigenvalues وeigenvectors، تشابه المصفوفات المربعة ، المصفوفات القطرية. حل المعادلات التفاضلية من الدرجتين الاولى و الثانية و نظريات الوجود و التفرد لها.


  • 12120205: الكترونيات [3 ساعات]

    Provides a broad introduction to the fundamentals of Electronics. The atom, materials used in semiconductors, current in semiconductors, N-type and P-type semiconductors and the PN junction. Diodes and its applications with emphasis on half-wave rectifiers, full wave rectifiers, filters, regulators, limiters clampers and multipliers. Special-purpose diodes with particular emphasis on Zener diode and its applications. Bipolar Junction Transistor (BJT) including BJT bias circuits and BJT amplifier configurations with a focus on common-emitter amplifier. Filed-Effect Transistors (FETs), JFET, MOSFET, characteristics, parameters and biasing.


  • 12210588: انظمة الطاقة المتجددة [3 ساعات]

    This course is to introduce students with renewable energy resources availability, potential and suitability as an alternative to conventional energy resources in the future energy market. Applications will include solar energy; wind energy; hydropower; biomass; geothermal energy; tide, wave, and ocean energy. Discussions of economic; politics; environment; and social policy are integral components of the course.


  • 12120307: تصميم اللوحات الالكترونية [2 ساعات]

    Electrical circuits design, electronics and digital ICs, simulation of electrical/ electronic circuits. Interfacing ICs, printed circuit board design, manual soldering.


  • 15050101: كيمياء عامة (1) [3 ساعات]

    يتضمن هذا المساق القواعد الأساسية النظرية المتعلقة بالطرق العلمية في القياس، الحسابات الكيميائية، الجدول الدوري، البنية الإلكترونية، الروابط الكيميائية، الكيمياء الحرارية، التفاعلات الكيميائية، الحالة الغازية، حالات المادة، خواص المحاليل، و  الأحماض والقواعد والاتزان للأحماض والقواعد في المحاليل المائية .


  • 12210591: الكترونيات وكهرباء السيارات [3 ساعات]

    The following topics are covered: automotive batteries, battery charging system, vehicle starting system, ignition system, engine electrical components (radiator fan motor, cooling system electricity, ecus, sensors, pre-heating system of coils for diesel engines, relays), vehicle lighting system (circuit diagram of headlights/tailgate lights, parking system, bulbs, fuses).


  • 12230405: هندسة السلامة [3 ساعات]

    The course focuses on tools, techniques and methodologies needed for prevention of occurrences of unsafe operations and accidents under different industrial settings. Additionally it covers; the fundamentals of chemical release, dispersion, toxicity, fire, and explosion. Process safety design to mitigate consequences of catastrophic fire and explosion.